Tascam MZ-372 3HE 3 zone installatie mixer met 7 ingangen

Productbeschrijving

The MZ-372 is a rackmount mixer designed for fixed installations in hotels, conference centres, public facilities, theme parks or bars.
It offers seven input channels, two pairs of main outputs and a sub output.

Six input channels can be used for microphones or line-level signals from analogue playback sources like media players, tuners or cassette decks, each equipped with gain controls, LED level meters, three-band equalizers and 100mm faders.
Up to three of these channels can be switched to phono to connect record players (turntables).
An additional mic input with level control and two-band equalizer on the front side can be used for announcements or speech reinforcement.
In this case, the built-in Talkover function can be used to automatically lower the volume of background music according to the mic volume.

Each of the two main outputs has its own level control and stereo LED level meter. An independent sub output with level control and mono/stereo selection can be used to drive an external master recorder or an additional room.
And there is a headphones output with level control for pre-fader monitoring of selected input channels and the main output signal.

The MZ-372 allows multiple audio sources to be selected, mixed and routed to two redundant outputs, controlled by familiar volume sliders and assignment buttons.
Input signals can be inserted via six audio channels, each offering two sets of unbalanced RCA-type stereo pairs and a balanced XLR connector for a total of twelve sets of RCA-type inputs and six XLR inputs.
Tascam MZ-372 front panel mic inputEach set of input connectors can be selected as required by A/B/C switches on the front panel.
XLR inputs can also be switched between microphone and line level.
In addition, input channels 2, 3 and 4 can be set to accommodate phono-level signals for use with record players.

Located conveniently on the front panel, one additional XLR input is available driving a studio-quality mic preamp and talkover (ducking) circuit for easy voiceover and announcement work.

Dual main outputs each feature a combination of XLR balanced and RCA unbalanced connectors for easy integration into virtually any audio system.
This flexibility allows combinations of microphones, CD/DVD/Blu-ray players, instruments or any other audio source to be selected and sent simultaneously to all of the outputs, each with its own volume control.
The convenient “talkover” function will automatically lower the level of any mixed channel so the user of the microphone connected to the front panel can easily be heard in whichever zones you choose.

There is even a SUB output that can send the mixed signal to an external recorder which makes capturing event or music performances easy.
The MONITOR outputs provide another stereo feed with independent control for additional monitoring.

Specificaties

– main microphone input balanced XLR-3-31 (1: GND, 2: HOT, 3: COLD)
– unbalanced 6,3mm TRS jacks (Tip: HOT, Ring: COLD, Sleeve: GND)
– input impedance 33kOhm
– nominal input level -65dBu (VOLUME knob at MAX), -30dBu (VOLUME knob at MIN)
– mic/line inputs (balanced) XLR-3-31 (1: GND, 2: HOT, 3: COLD)
– set to mic, maximum input level -30dBu, minimum input level -65dBu
– input impedance 33kOhm
– set to line nominal input level -1dBu, maximum input level 20dBu
– input impedance 22kOhm
– line inputs (unbalanced) RCA pin jacks, nominal input level -10dBV
– maximum input level 10dBV
– input impedance 22kOhm
– main outputs (unbalanced) RCA pin jacks, nominal output level -10dBV
– maximum output level 6dBV
– output impedance 200Ohm
– main outputs (balanced) XLR-3-32 (1: GND, 2: HOT, 3: COLD)
– nominal output level 4dBu, maximum output level 24dBu
– output impedance 200Ohm
– sub outputs RCA pin jacks, nominal output level -16dBV, maximum output level 0dBV
– output impedance 200Ohm
– monitor outputs RCA pin jacks, nominal output level -16dBV, maximum output level 0dBV
– output impedance 200Ohm
– headphones output 6,3mm stereo jack
– maximum output power 50mW + 50mW (into 32Ohm load)
– frequency response 20Hz – 20kHz
– distortion < 0,03%
– crosstalk 65dB
– power supply dedicated AC adapter (PS-M1524)
– input voltage AC 100-240V-50/60Hz
– output voltage DC 15V
– output current 2,4A
– power consumption 35W
– overall dimensions (width x height x depth) 482mm x 132mm x 93mm
– weight 3,2kg
– permissible operating temperature 5 – 35C